Technical operation of metal-cutting machine safety requirements
Article Type：News
Article time：2011-5-20-18:37
General Metal Cutting Safety
1. The work of preparation before
① Select and use appropriate protective equipment, wearing overalls to be fastened cuffs, full button buckle, the hair inside the cap pressure at work.
② Check the protective equipment is intact.
③ Check the status of special lifting equipment of the machine is normal.
④ Check and layout of workplaces, press the left, right hand used to place the tools, cutting tools, blanks, parts to be stacked well.
⑤ Check the machine status, such as the location and strong protective devices, power cable, operating handle, hand wheel, the cooling lubricant and machine hoses and other moving parts are touching, etc., and tools to understand the use of the former class.
⑥ empty check start and stop buttons; handle, lubricating and cooling system is normal.
⑦ large machine tools to be more than two operations, the main operator must be clear, by the unified command, with each other.
2. Work requirements
① is the weight of the workpiece, the outline size machine should adapt to the technical performance data.
② pieces weighing more than 20kg to be processed, make use of lifting equipment. To move easily, lifting clamp attachment can be a dedicated and reliable only in the machine tops card only after release by lifting the clamping attachment.
③ fastening the workpiece, tool or machine tool attachments to stand.
④ rotating workpiece or tool rotation in the case against wearing gloves.
sales@gzhch.com
